Splitting The Keyboard Between Two Tones; Using Layer And Split Together - Casio Privia PX-400R User Manual

Selecting and Using Built-in Tones
Splitting the Keyboard between
Two Tones
You can assign different tones to keys on the left side and the right
side of the keyboard.
Split Point
Strings
Use the procedure under "Selecting a Tone" to select
1
the tone you want to assign to the right side of the
keyboard.
Example: To select Grand Piano, press the PIANO button,
and then rotate the dial until "Grand Piano" is
displayed as the tone name.
Press the SPLIT button.
2
• This causes the SPLIT indicator lamp to light.
Select the tone you want to assign to the left side of the
3
keyboard.
Example: Strings
• Now you can play using the two tones.
After you are finished using the split keyboard, press
4
the SPLIT button again to unsplit it.
• This causes the SPLIT indicator lamp to go out.
To specify the keyboard split point
While holding down the SPLIT button, press the
1
keyboard key where you want the left limit of the high
range (right) tone to be.
• A note does not sound when you press a keyboard key at
this time.
S l i t 0 P o i n t :
p
F # 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
NOTE
• The split point is the boundary between the Auto
Accompaniment area (pages E-11, E-12) and the melody area
of the keyboard. You can change the location of the split point,
which also changes the sizes of the keyboard areas.
E-8
PX400R_e_01-16.p65
Grand Piano
Left limit of the high range
Low range High range
0 0 0 0 0
8

Using Layer and Split Together

You can use the following procedure to layer two tones on the left
side of the keyboard (left main tone + left layered tone), and two
other tones on the right side (right main tone + right layered tone).
Split point
Split Tone Split Tone
+
Layered Split Tone Layered Split Tone
Use the procedure under "Selecting a Tone" to select
1
the right main tone.
Use the procedure under "Splitting the Keyboard
2
between Two Tones" to select the left main tone.
Press the SPLIT button to temporarily turn off split (SPLIT
3
indicator lamp unlit).
Use the procedure under "Layering Two Tones" to select
4
the left layered tone.
Press the LAYER and SPLIT buttons as required so the
5
indicators of both buttons are lit.
Use the procedure under "Layering Two Tones" to select
6
the right layered tone.
Use the procedure under "To specify the keyboard split
7
point" to specify the split point.
Now you can play using your layered tones and split
8
keyboard.
• After you are finished using layer and split, press the
LAYER button to unlayer it and the SPLIT button to
unsplit it.
04.8.24, 4:34 PM
Main Tone
+
Layered Tone
419A-E-010B