Dv Dubbing - Canon MVX4 Instruction Manual

DV Dubbing

You can input video from other digital video devices via the DV terminal, and record the
input video on the tape in the camcorder. You can also record the input video as a movie
or still image on a memory card.
Connecting
Check the direction before connecting the DV cable. Refer also to the instruction manual
of the connected device.
Digital video device
(e.g. camcorder)
Dubbing
1. Set the camcorder to PLAY(VCR)•
If "AV DV" is displayed, change the setting (
2. Connected device: Load the recorded cassette.
3. Press the REC PAUSE button.
4. Connected Device: Play back the tape.
You can check the picture on the camcorder's screen.
5. Press the /
Recording starts.
6. Press the button to stop recording.
• Press the /
• Press the /
7. Connected Device: Stop playback.
Signal flow
Commercially available DV cable
button when the scene you wish to record appears.
button to pause recording.
button again to restart recording.
mode and load a blank cassette.
65).
E
99