Recording From Digital Video Devices (Dv Dubbing) - Canon MV960 Instruction Manual

Video Devices (DV Dubbing)
You can record from other digital video devices equipped with a DV terminal with virtually
no loss in picture and sound quality.
1. Connect the camcorder to the digital video device.
See Connecting a Digital Video Device (
2. Set the camcorder to
Make sure that [AV
3. Connected device: Load the recorded cassette or disc.
4. Open the FUNC. menu, select (
pause icon
5. Select (
In record pause and during recording, you can check the picture
on the screen.
6. Connected device: Play back the tape or disc.
7. If the joystick guide does not appear on screen,
press (
8. Push the joystick (
you wish to record appears.
• Recording starts.
• Push the joystick (
9. Push the joystick (
10.Connected Device: Stop playback.
Blank sections may be recorded as anomalous picture.
If the picture does not appear, reconnect the DV cable or turn the camcorder off
and back on again.
You can only record video signals from devices with the
recordings in SD (standard definition) standard, in SP or LP recording mode.
Note that signals from identically shaped DV (IEEE1394) terminals may be in
different video standards.
We recommend powering the camcorder from a household power source.
Downloaded From VideoCamera-Manual.com Manuals
Recording from Digital
DV] is set to [OFF] (
and press (
) [EXECUTE] and press (
) to display it.
) towards
) towards
) towards
70).
mode and load a blank cassette.
76).
) the recording
).
).
/ when the scene
/
again to pause/resume the recording.
to stop recording.
logo from
E
73