Embroidery Applications; Combining A Frame Pattern With A Design - Brother PE-150 User Manual

Personal embroidery system
Hide thumbs Also See for PE-150:
Table of Contents

Advertisement

Available languages

Available languages

EMBROIDERING APPLICATIONS

Combining a frame pattern with a design

1. Select a frame pattern and embroider it.
A "+" mark is sewn after embroidering of the frame pattern in
the center of pattern. This mark can be used as a guide
when embroidering characters or patterns to position them
within the frame pattern.
2. Using the "+" mark inside the frame pattern as a guide, align
the needle using the center needle layout function.
Embroider the design.
Making badges or decorative patches
1. After embroidering a frame pattern and the combined
design, sew an extra frame pattern on the outside using the
"– – –" stitch slightly larger than the original frame pattern.
2. Cut cleanly around the frame pattern, following the line of
the outside pattern.
The finished badge or decorative patch is now ready
to be attached to a project.
51

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Pe-200

Table of Contents