Sewing Overcasting Stitches Using The Optional Side Cutter - Brother CS-8150 Operation Manual

UTILITY STITCHES ——————————————————————————————————————————————————

Sewing overcasting stitches using the optional side cutter

Using the side cutter, seam allowances can be finished while the edge of the fabric is cut off. Five stitches can be
used to sew overcasting stitches with the side cutter.
Stitch Name
Pattern
63
Sewing straight stitches while cutting
the fabric
64
Sewing zigzag stitches while cutting
the fabric
Preventing fraying in thin and
65
Overcasting
mediumweight fabrics while cutting
stitch
the fabric
66
Preventing fraying in thick fabrics
while cutting the fabric
67
Preventing fraying in thick fabrics
while cutting the fabric
1 Remove the presser foot.
• For details, refer to "Replacing the presser
foot" (page 41).
2 Hook the connecting fork of the side cutter
onto the needle clamp screw.
1
1 Connecting fork
2 Needle clamp screw
70
Application
3
2
Stitch Width Stitch Length
[mm (inch.)] [mm (inch.)]
Auto Manual Auto
0.0 0.0–2.5 2.5
(0) (0–3/32) (3/32)
3.5 3.5–5.0 1.4
(1/8) (1/8–3/16) (1/16)
3.5 3.5–5.0 2.0
(1/8) (1/8–3/16) (1/16)
5.0 3.5–5.0 2.5
(3/16) (1/8–3/16) (3/32)
5.0 3.5–5.0 2.5
(3/16) (1/8–3/16) (3/32)
Position the side cutter so that side cutter pin
is aligned with the notch in the presser foot
holder, and then slowly lower the presser foot
lever.
1
1 Notch in presser foot holder
2 Pin
The side cutter is attached.
Presser
Foot
Manual
0.2–5.0
(1/64–3/16)
0.0–4.0
(0–3/16)
1.0–4.0
S
(1/16–3/16)
1.0–4.0
(1/16–3/16)
1.0–4.0
(1/16–3/16)
2