Removing The Presser Foot Holder - Brother CS-8150 Operation Manual

Removing the presser foot
holder
Remove the presser foot holder when cleaning the
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
quilting foot. Use the screwdriver to remove the
presser foot holder.

■ Removing the presser foot holder

Remove the presser foot.
1
• For details, refer to "Replacing the presser
foot" (page 41).
Use the screwdriver to loosen the presser foot
2
holder screw.
1
1 Screwdriver
2 Presser foot holder
3 Presser foot holder screw
■ Attaching the presser foot holder
Align the presser foot holder with the lower-
1
left side of the presser bar.
2
3
Hold the presser foot holder in place with
2
your right hand, and then tighten the screw
using the screwdriver in your left hand.
1
1 Screwdriver
Note
● If the presser foot holder is not correctly
installed, the thread tension will be
incorrect.
Replacing the Presser Foot 43