Checking The Selected Pattern; Changing The Pattern Length - Brother CS-8150 Operation Manual

Checking the selected
pattern
Up to 70 patterns can be combined. If all of the
selected patterns cannot be displayed in the LCD at
the same time, the pattern can be checked according
to the following procedure.
1 Press (settings key) in the operation panel.
The settings screen appears.
2 Press , ,
is selected.
3 Press (OK key).
The screen for checking the pattern appears.
4 Press and to scroll through the
pattern and check it.
Press (OK key).
5
The initial stitch screen appears again.
and (arrow keys) until

Changing the pattern length

The length of one part of a satin stitch can be set to
one of five sizes.
1 Select a satin stitch
2 Press (settings key) in the operation panel.
The settings screen appears.
3 Press ,
is selected.
4 Press (OK key).
The screen for changing the length of a satin
stitch appears.
5 Press and
selected.
The length can be set within the range of
and .
The satin stitch length is changed.
6 Press (OK key).
The initial stitch screen appears again.
Sewing the Various Built-In Decorative Patterns
.
, and (arrow keys) until
until the desired ratio is
111