k
Press + or - to choose Network.
Press OK.
l
Press + or - to choose WLAN.
Press OK.
m
Press + or - to choose SES/WPS/AOSS.
Press OK.
n
The machine will search for an access point that supports SecureEasySetup™, Wi-Fi Protected Setup
or AOSS™ for 2 minutes.
o
Put your access point in the SecureEasySetup™ mode, Wi-Fi Protected Setup mode or AOSS™ mode,
depending on what is supported by your access point. Please refer to the instruction manual that came
with your access point.
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
5
73