Printer Driver Already Installed; Other Sources Of Information - Brother HL-3040CN Network User's Manual

Printer driver already installed

If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
®
a
For Windows Vista
(For Windows Vista
(For Windows Server
Printers.
®
For Windows XP and Windows Server
Click the Start button and choose Printers and Faxes windows.
®
For Windows 2000:
Click the Start button and choose Settings and then Printers.
b
Right-click on the printer driver you wish to configure, and then choose Properties.
c
Click the Ports tab and click Add Port.
d
Choose the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the New
Port... button.
e
The Standard TCP/IP Port Wizard will start. Click Next.
f
Enter the IP address of your network printer. Click Next.
g
Click Finish.
h
Close Printer Ports and Properties dialog box.

Other sources of information

See Configuring your machine for a network on page 10 and Configuring your machine for a wireless network
(For HL-3070CW) on page 18 to learn how to configure the IP address of the machine.
®
and Windows Server
®
) Click the button, Control Panel, Hardware and Sound, and then Printers.
®
2008) Click the Start button, Control Panel, Hardware and Sound, and then
®
2003:
Network printing from Windows
2008:
®
basic TCP/IP Peer-to-Peer printing
11
11
11
135