Step by step chart for wireless network configuration
For Infrastructure mode
a
Confirm your network environment. (See page 24.)
o Infrastructure mode
Connected to a computer with an access point
b
Confirm your wireless network setup method. (See page 25.)
Temporarily using a
network cable
c
Configure your machine for a wireless network. (See page 28.)
®
(For Windows
)
See page 29.
(For Macintosh)
See page 60.
(For Windows
(For Macintosh) See page 86.
Wireless configuration and installing printer driver have been completed.
Using the Brother
installer application
(Recommended)
Using the
SES/WPS/AOSS
control panel menu
Configuring your machine for a wireless network
®
(For Windows
)
See page 40.
(For Macintosh)
See page 70.
Installing the printer driver
®
) See page 57.
Configuring your machine for a wireless network (For HL-3070CW)
o Ad-hoc mode
or
Connected to a wireless capable computer without
an access point
Using the
SES/WPS/AOSS control
panel menu
(if your wireless access
point supports either
SecureEasySetup™,
Wi-Fi Protected Setup
or AOSS™)
See page 88.
®
(For Windows
)
See page 91.
(For Macintosh)
See page 95.
See page 23.
Using the PIN Method of
Wi-Fi Protected Setup
(if your wireless access
point supports Wi-Fi
Protected Setup)
See page 98.
®
(For Windows
)
See page 100.
(For Macintosh)
See page 104.
3
3
3
22