Table of Contents
Advertisement
Packing and Shipping the MFC
Whenever you transport the MFC, use the packing materials that came with your MFC.
If you do not pack the MFC correctly, you could void your warranty.
1
First, remove all the ink cartridges and attach the white shipping cover. (See
Replacing the Ink Cartridges
cover, press the all ink cartridge covers down.
Caution
Damage to your print head resulting from packing without the shipping cover
may void your warranty.
2
Attach the protective yellow bar, and then close the top cover and control panel
cover until they click into place.
3
Unplug the MFC from the telephone wall jack and remove the telephone line
cord from machine.
Caution
Do not unplug the MFC after a print job until you hear the final click.
4
Unplug the MFC from the AC outlet.
5
Unplug the USB cable from the MFC , if it is connected.
6
Remove the paper support, output paper support, ADF document support, ADF
document output support, handset and handset curled cord.
If you are packing the machine for the Brother Exchange Service, keep these
Note
items and return only the machine.
23 - 13
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
, page 23-17.) After attaching the white shipping
To attach the white shipping cover
Protective Yellow Bar
Advertisement
Table of Contents
