Brother DCP-9040CN User Manual page 80

Error Message
Registration
Scan Unable XX
Toner Life End
Replace Black(K)
1
Toner Cartridge.
1
The toner cartridge
color which is used
up is shown in the
message.
Toner Low
Prepare New Black(K)
1
Toner Cartridge.
1
The toner cartridge
color which is near
the end of life is
shown in the
message.
Waste Toner Full It is time to replace the waste
Waste Toner Soon The waste toner box is almost full. Be ready to replace the waste toner box. (See
Wrong Paper Size The paper in the tray is not the
66
Cause
Registration failed.
The machine has a mechanical
problem.
The drum unit and toner
cartridges assembly is not
installed properly, or one or more
of the toner cartridges are used
up and printing is not possible.
If the LCD shows Toner Low,
you can still print; however, the
machine is telling you that the
toner cartridge is near the end of
its life and the toner will soon run
out.
toner box.
correct size or the tray is empty.
Action
Press Black Start or Color Start and try
again.
Do one of the following:
Try Manual Registration, Menu, 3, 7. (See
Manual Registration on the Software
User's Guide on the CD-ROM.)
Put in a new belt unit. (See Replacing the
belt unit on page 107.)
Put in a new drum unit. (See Replacing the
drum unit on page 101.)
Replace the empty toner cartridge with a
new one. (See Replacing a toner cartridge
on page 96.)
Turn off the machine's power switch. Wait
a few seconds, then turn it on again.
If the problem continues, call Brother
Customer Service.
Turn off the machine's power switch and then
turn it on again. If the error message continues
leave the machine for several minutes before
you try it again.
Do one of the following:
Re-install the toner cartridges and drum
unit assembly.
Replace the empty toner cartridge with a
new one. (See Replacing a toner cartridge
on page 96.)
If one of the color toner cartridges is empty,
choose Mono in the printer driver to be
able to continue printing in monochrome.
Order a new toner cartridge now for the toner
cartridge color that is low.
Replace the waste toner box. (See Replacing
the waste toner box on page 112.)
Replacing the waste toner box on page 112.)
Load the correct size of paper in the tray.