Connecting a Stereo TV (SDTV)
1. Connect the stereo audio cable to the AUDIO L and R connectors on the QIP
receiver and the AUDIO LEFT and AUDIO RIGHT connectors on the Stereo TV
(SDTV).
2. Connect a video cable to the VIDEO OUT connector on the QIP receiver and the
INPUT VIDEO on the TV or an S-video cable to the S-VIDEO connectors on the
QIP receiver and the TV.
These video connection methods do not support HD video. If you have an HDTV, see
Connecting your QIP Receiver to an HDTV — Video Only
T
on page
24
17
.