Connecting Your Qip Receiver To A Stereo Tv (Sdtv) And Stereo Vcr; Connecting A Stereo Tv (Sdtv) And Stereo Vcr - Motorola QIP7100 Series User Manual

5 CONNECTING YOUR QIP RECEIVER

Connecting Your QIP Receiver to a Stereo TV (SDTV) and Stereo VCR

L/R audio
connection
FiOS TV IN
CABLE/
ANTENNA IN
ToTV

Connecting a Stereo TV (SDTV) and Stereo VCR

1. Connect a stereo audio cable to the AUDIO OUT L and R connectors on the
QIP7100 Series receiver and the INPUT AUDIO L and R connectors on the stereo
VCR.
2. Connect a video cable to the VIDEO OUT connector on the QIP7100 Series
receiver and the INPUT VIDEO connector on the stereo VCR.
3. Connect a stereo audio cable to the OUTPUT AUDIO L and R connectors on the
Stereo VCR and the INPUT AUDIO LEFT and RIGHT connectors on the Stereo TV
(SDTV).
4. Connect a video cable to the output video connector on the stereo VCR and the
input video connector on the Stereo TV (SDTV).
Note: You can also connect using the S-Video connectors if supported by your stereo
VCR.
These video connection methods do not support HD video. If you have an HDTV, see
Connecting your QIP Receiver to an HDTV — Video Only
Video
connection
S-Video
CableCARD
RF TV OUT
Digital
Audio
IR Remote
Input
Optical
Audio
Serial
Coax Cable in
VCR
INPUT OUTPUT
AUDIO VIDEO AUDIO VIDEO
L R L R
Video
Y
Out
Ethernet
Audio
Pb
Left
HDMI
1394
SWITCHED
Firewire 105-125 V
60 Hz
Audio USB
4 A MAX
Pr
Right
500 W MAX
Standard-DefinitionTV
CABLE/
ANTENNA IN
23
QIP7100
INPUT
S-VIDEO
VIDEO
L
AUDIO
R
on page 15.