Preferences / Auto Settings - Daewoo DF-8100 User Manual

8
Press [ENTER] to confirm your rating selection, then press [SETUP] to exit
the menu.
Change Password
1
While 'Preferences' is selected, press [†] to select 'Parental Controls'.
2
Press [ENTER]. The 'Parental Controls' submenu appears.
3
Use [.../†] to select 'Change Password' then press [ENTER].
4
The 'Change Password' submenu appears. Enter your current 4-digit
password.
5
Enter a new 4-digit password. Re-enter the new password to confirm, press
[ENTER].
Master Password :
• If you forget your password, press 3,3,0,8 on the remote
control and then press [ENTER].
• Set the new password to something other than '0000'.
Set Parental Country Code
1
While 'Preferences' is selected, press [†] to select 'Parental Controls'. Then
press [†] to select 'Set Parental Country Code'.
2
Press [ENTER]. Enter your current 4-digit password then press [ENTER].
3
Use [.../†] to select the desired country and press [ENTER] to confirm.
30
Initial Setup

PREFERENCES / Auto Settings

Parental Control
1
Set Parental Level ADULT
2
Change Password
Set Parental Country Code
Instructions
Enter-Confirm Setup-Exit Move ...†
Auto Clock Set
Parental Control
Auto Clock enables the DVD Recorder+VCR to set the clock automatically
Set Parental Level ADULT whenever it is in Standby mode (plugged in but powered off).
Change Password
Auto Clock is only available for models with the VPS/PDC function.
Set Parental Country Code
Some broadcasting stations may send the time and date along with the VPS/PDC
data. The video will automatically use this time and date during the initial setting
up procedure during normal use, and every time you switch the video off at the
Instructions mains. If you find that this time and date is incorrect you can remove this feature
Enter-Confirm Setup-Exit Move ...†
by following the steps below changing it to the OFF mode, you will then have to
manually set the time and date, see above.
Change Password
1
Current Code * * * *
2
Enter New Code * * * *
Confirm Code * * _ _
AV Link
Instructions
If your TV is AV Link available, you can download the channels
Setup-Exit
information from your TV set, connecting the SCART1 jack to TV.
Follow the same procedure as 'Auto Clock Set' to set the 'AV Link' status.
Parental Control
Set Parental Level ADULT
Change Password
VPS/PDC
Set Parental Country Code
VPS/PDC is a service provided by some stations to enable you to perform
timer recordings precisely even if the broadcaster delays the start time of
Instructions
the programme slightly. The time you enter is the VPS/PDC time so this
Enter-Confirm Setup-Exit Move ...†
must be correct. Not all stations offer VPS/PDC, in which case the player
will start at the time you enter and not the actual start time of the
Parental Country Code
programme.
Please select Country for Parental Setup
If you wish to start recording at a specific time without it being adjusted
...
by the VPS/PDC system in the event of a delay, switch VPS/PDC off
Australia
† otherwise the player will not record.
Belgium
Denmark
Follow the same procedure as 'Auto Clock Set' to set the 'VPS/PDC'
Finland
status.
France
Instructions
Enter-Confirm Setup-Exit Move ...†
While 'Preferences' is selected, press [†] to select 'Auto Settings'.
Press [ENTER] to display the submenu.
Use [.../†] to select 'Auto Clock Set' and press [ENTER].
Use [.../†] to change the 'Auto Clock Set' status, and press [ENTER] to confirm.
• "VPS/PDC" and "Auto Clock Set" are not provided for some countries.
Initial Setup
Preferences
Video
Audio
Parental Controls
Auto Settings
VCR
Instructions
Enter-Confirm Setup-Exit
Move ...†
Auto Settings
Auto Clock Set Off
Select Auto
AV Link Off
Clock Status
VPS/PDC Off
Off
On
Instructions
Enter-Confirm Setup-Exit Move ...†
Auto Settings
Auto Clock Set On
AV Link Off
Select AV
VPS/PDC Off
LInk Status
Off
On
Instructions
Enter-Confirm Setup-Exit Move ...†
Auto Settings
Auto Clock Set On
AV Link On
VPS/PDC Off
Select VPS/
PDC Status
Off
Instructions
On
Enter-Confirm Setup-Exit Move ...†
31