Table of Contents
Advertisement
Power Management
Battery Calibration
The first time you use a battery, you should calibrate it. The calibration
process empties and charges the battery one time. This allows the
Windows battery gauge to accurately monitor battery status. To calibrate
a battery, follow these steps:
1. Plug in the AC adapter.
2. Restart the computer and when the startup screen appears, press Del key to
enter the BIOS Setup Utility.
3. In the BIOS Setup Utility, select Advance settings. , choose Battery learning,
then press enter.
4. Press <OK> at the above Battery Auto Calibration dialog to begin the battery
calibration.
Battery Calibration will take from 4 to 8 hours, depending on how much
power the battery may already contain.
Note: For optimum performance, we recommend calibrating the
battery again every three months. Each time you charge and
discharge a battery, it loses a tiny part of its storage capacity, so that,
over time, it will store less than its potential charge. Similarly, if you
do not use the battery for a few days, it will slowly self-discharge, and
when it is recharged, it will hold less than 100% of the potential
charge.
Execute Battery Learning function?
[OK]
[Cancel]
Power Management
Advertisement
Table of Contents
