The Graphics System; Screen Controls - AVERATEC AV3360-EG1 User Manual

Averatec av3360-eg1: user manual
Table of Contents

Advertisement

3.
Press the card downwards so that it is flat inside the compartment (4). You
may hear an audible click as the latches of the connector lock the card in
place.
4.
Replace the RAM compartment cover and secure it with the two screws.
Your notebook computer will automatically detect the change in RAM capacity when it
restarts.

The Graphics System

Your computer has a high-performance graphics system, which can easily handle the
demands of today's multimedia computing.

Screen Controls

Brightness
Function keys can increase or decrease the brightness of the monitor.
<Fn> + <F6> decreases the LCD panel brightness
<Fn> + <F7> increases the LCD panel brightness
Resolution
1. Click My Computer/Control Panel/Display/Settings. Click the Settings tab. The
dialog box indicates the monitor resolution.
2. Use the slide bar to adjust the resolution. Normally, you should use the
resolution the LCD or monitor was designed for.
Note: Using a lower resolution than the screen was designed for will
reduce the area of the display. Using the computer in DOS mode may
produce the same effect, because it uses a 640 by 480 resolution by
Getting Started

Advertisement

Table of Contents
loading

This manual is also suitable for:

Av3360-eh1

Table of Contents