Table of Contents
Advertisement
Inserting a Disc
1. Press the button on the front of
the drive to open the disk tray
and pull the tray open.
2. Place the disk on the tray, label
side up.
3. Place the disk on the central
spindle and press gently until the
disk clicks into place.
4. Slide back the tray until it clicks
shut.
Removing a Disc
1. Make sure the computer is not
accessing the optical drive.
2. Press the eject button and pull
the tray all the way out.
3. Pick up the disc by the edges
and remove the disc from the
tray. Push the tray into the
computer until it closes fully.
Warning: When the computer is reading from the optical drive, the
indicator light for the optical drive will flash on. Do not attempt to
remove a disc while this light is active.
Precautions for Handling Optical Discs
Keep these precautions in mind when handling optical discs.
Always hold the disc by the edges; avoid touching the surface of the disc.
Use a clean, dry, cloth to remove dust, smudges, or fingerprints. Wipe from the
center outward.
Do not write on the surface of the disc.
Extremes in temperature may damage discs. Store discs in a cool dry place.
Do not use benzene, thinners, or cleaners with detergent. Only use optical disc
cleaning kits.
Do not bend or drop the discs.
Do not place objects on top of discs.
Getting Started
Advertisement
Table of Contents
