Memory Configuration - Asus Terminator A7VT User Manual

5.4.2 Memory configuration

The items in this menu show the memory configuration settings. Select an
item then press <Enter> to display a pop-up menu with the configuration
options.
Current DRAM Frequency
DRAM Clock
DRAM Timing
x DRAM CAS Latency
x Bank Interleave
x Precharge to Active (Trp)
x Active to Precharge (Tras) 7T
x Active to CMD (Trcd)
DRAM Burst Length
DRAM Command Rate
Write Recovery Time
tWTR
DRAM Clock [By SPD]
Sets the DRAM frequency. Configuration options: [By SPD] [133 MHz]
[166 MHz]
DRAM Timing [Auto by SPD]
The DRAM clock is set according to DRAM SPD (Serial Presence Detect).
Select [Auto by SPD] for automatic DRAM clock detection. Select [Manual]
to set the DRAM Timing manually. Select [Safe] to set the DRAM timing to
safe value. Configuration options: [Auto by SPD] [Manual] [Safe]
DRAM Burst Length [4]
Sets the DRAM burst length width. Configuration options: [4] [8]
DRAM Command Rate [2T Command]
Sets the DRAM command rate .
Configuration options: [1T Command] [2T Command]
Write Recovery Time [3T]
Sets the DRAM write recovery time. Configuration options: [2T] [3T]
tWTR [2T]
Sets the tWTR time. Configuration options: [1T] [2T]
78
Memory Configuration
133 MHz
[By SPD]
[Auto by SPD]
2.5
Disabled
5T
5T
[4]
[2T Command]
[3T]
[2T]
Select Menu
Item Specific Help
Set DRAM Frequency.
Chapter 5: BIOS information