Expansion Card Installation; Configuring An Expansion Card - Asus Terminator A7VT User Manual

2.8.2 Expansion card installation

Follow these steps to install a PCI
or AGP card.
1. Place the chassis on its side.
2. Remove the metal bracket
opposite the slot that you wish
to use.
3. Align the card golden fingers
to the slot and its metal
bracket to the slot opening on
the chassis.
4. Press the card firmly until it is
properly seated on the slot.
5. Secure the card to the chassis
with a bracket screw.

2.8.3 Configuring an expansion card

After installing the expansion card, configure it by adjusting the software
settings.
1. Turn on the system and change the necessary BIOS settings, if any.
See Chapter 5 for information on BIOS setup.
2. Install the software drivers for the expansion card.
ASUS Terminator 1 A7VT barebone system
Metal bracket PCI slot (PCI1)
AGP slot (AGP1)
29