2.11 Re-connecting cables
You may have disconnected some cables when you were installing
components. You must re-connect these cables before you replace the
chassis cover.
2.11.1 LED cables
Power Switch
Power LED
HDD LED
•
Connect the power switch and power LED cables to their respective
leads in the PANEL connector on the motherboard.
•
Connect the HDD LED cable to the 2-pin lead marked HDLED.
ASUS Terminator 1 A7VT barebone system
*
PANEL
PLED
SPEAKER
HDLED
RESET
SMI
PWRBTN*
Requires an ATX power supply.
35