Asus Terminator A7VT User Manual page 60

4. ATX power connectors (20-pin ATXPWR, 4-pin ATX +12V)
These connectors are for ATX power supply plugs. The plugs from
the power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
A7VT ATX power connectors
Make sure to connect the 4-pin ATX +12V power plug; otherwise, the
system does not boot up.
5. Front panel audio connector (5-1 pin MIC_LOUT)
This connector is for a chassis-mounted front panel audio I/O module
that supports legacy AC'97 audio standard.
A7VT Front panel audio connector
60
ATXPWR
A7VT
®
Head set Right channel
A7VT
®
Chapter 4: Motherboard information
+12.0Volts +5.0 Volts
+5V Standby +5.0 Volts
Power Good -5.0 Volts
Ground Ground
+5.0 Volts Ground
Ground Ground
+5.0 Volts Power Supply On
Ground Ground
+3.3 Volts -12.0Volts
+3.3 Volts +3.3Volts
ATX12V
COM +12V DC
COM +12V DC
MIC_LOUT
Head set Left channel
GND
1
1
MIC PWR MIC Signal