Options; High Temperature; Extra Dry; Press Start - Asko D3121 Use And Care Manual

Options

Select options
To select an option, press one of the option
buttons.

High temperature

With the temperature option button you can
select the wash temperature yourself. You
can vary the temperatures as follows:
:
Heavy wash
Normal wash
Quick wash:
The field next to the button lights up if you
have selected the higher temperature. The
selection remains until changed.

Extra dry

If you require a better drying result, press
the option button Drying selection. The field
next to the button lights up. Should you
require a program without Extra drying –
press again and the light will go out. Cannot
be used in the Rinse & Hold program.
The dishwasher will now start. It manages
the entire wash automatically. Ensure that
the door is properly closed or the machine
will not start. The circle around the Start/
Stop button lights up progressively as it
works through the program.

Changing options

If you want to change program after having
70°/55°C
started the dishwasher, press the Start/Stop
45°/50°C
button for three seconds. Then select a new
30°/50°C
program and press the Start/Stop button.

Do you want to load more dishes?

Open the door slowly; the machine stops
automatically, put in the dishes, close the
door and the dishwasher will continue from
where it left off.
If the machine is switched off
from the main switch
(or in the event of a power cut) before the
washing program has been completed, the
interrupted program will continue when
power comes back on.
When the dishwasher has finished, the
whole circle around the Start/Stop button
will be lit up. It will then only consume
standing current. Should you wish to dis-
connect the current completely, just switch
off at the main switch. Turn off the water tap
if the machine is not to be used for an ex-
tended period, e.g. during holidays.
Advice!
For quicker drying allow the door to stand
slightly ajar.

Press Start

7

After dishwashing

1 3