Table of Contents
Advertisement
Dishwashing
6
Select options
To select an option, press one of the option
buttons. The field under the button lights when
the option is activated. The available options depend
on the selected program. Once you have started the
program, the options you selected are saved for the
next time you use the same program.
Temperature
The Temperature option button allows you to select
a higher or lower temperature for the main wash. If
you want to improve dishwashing performance,
activate the option for a higher temperature. This
option remains selected until changed.
You can vary the temperature as shown below:
Heavy wash:
130 °F (55 °C)/ 160 °F (70 °C)
Normal wash:
130 °F (55 °C)/ 150 °F (65 °C)
Daily wash:
140 °F (60 °C)/ 150 °F (65 °C)
Quick wash:
85 °F (30 °C)/ 140 °F (60 °C)
Super Quick:
85 °F (30 °C)/ 140 °F (60 °C)
Delicate wash:
105 °F (40 °C)/ 120 °F (50 °C)
Eco wash:
120 °F (50 °C)/ 140 °F (60 °C)
Drying
Press the Drying option button for improved drying
results. The temperature increases during the final
rinse, which improves drying results but increases
program time and energy consumption. If you want a
program with Short dry, press it again and the field
under the button turns off. This option can be used
with all programs except Rinse & Dry and Rinse &
Hold.
7
Press Start/Stop and close the
door
The display flashes three times with the
remaining time to indicate that the program has
started. Close the door properly, otherwise the
dishwasher will not start. The display indicates
if the door is open.
NOTE!
If the machine does not start within 2 minutes of the
last button press, the display returns to showing the
last program run.
Stopping or changing a program
If you want to change programs after starting the
dishwasher, open the door then press and hold
Start/Stop for three seconds. Add more detergent if
the lid of the detergent dispenser has opened. Then
choose a new program, press Start/Stop, and close
the door.
Do you want to add more dishes?
Open the door. The dishwasher stops automatically.
Add the dishes, close the door, and the dishwasher
resumes the program.
If the dishwasher is turned off using the main
power switch or due to a power failure
If the program was not finished, the interrupted
program resumes when power is restored.
NOTE!
During drying, the program is interrupted if the power
is cut or the door is open for more than 2 minutes.
8
After dishwashing
Once the program has finished, "End" appears
on the display.
A buzzer also sounds at the end of the program. See
the section Settings, which describes how to change
this function.
Once the dishwasher has finished, it uses only
standby power. Turn off the dishwasher using the
main power switch if you want to completely cut the
power. Turn off the water supply valve after each use.
Customer Care Center
1-800-898-1879
www.askousa.com
17
Advertisement
Table of Contents
