Record Your Own Ogm; Answer Only - Motorola D511 User Manual

At the end of playback:
You will hear, 'End of messages. To delete all messages,
press delete'. To delete all messages, press
hear, 'All messages deleted'. If you do not press any buttons
during the countdown the display will return to idle and any
messages you selected individually for deletion will be
saved.
Outgoing messages (OGMs)
The outgoing message is the message a caller first hears
when the answering machine picks up their call.
Your D5 product has two pre-recorded outgoing messages,
Answer & Record or Answer Only, and you can also record
your own.
The pre-set Answer and Record outgoing message, that
allows your caller to leave a message, is 'Hello, your call
cannot be taken at the moment, so please leave your
message after the tone'.
10.6

Record your own OGM

This will replace the pre-recorded or your own previous
outgoing message. However, you can re-instate the pre-
recorded OGM at any time by deleting your own recorded
OGM.
Using the handset:
m
TAM SETTINGS
1. Press , scroll to
32
n
, you will
m
and press .
d
OGM SETTING
2. Scroll to
d
RECORD OGM
3. Scroll to
u d
4. Press or to select either
m
and press .
5. Place the handset to your ear. You will hear, 'Please
speak after the tone. To end recording, press #'.
6. After the long beep speak your message slowly and
clearly into the handset, to end recording press
Your message will then be played back to you through
the handset.
10.7

Answer Only

With Answer Only selected, your caller will hear an
announcement only and will not be able to leave a message.
The pre-set Answer Only outgoing message is 'Hello, your
call cannot be taken at the moment and you cannot leave a
message, so please call later'.
If recording your own Answer Only message, remember to
advise your caller that they will not be able to leave a
message.
To reinstate either pre-recorded message, delete your own
message.
m
and press .
m
and press .
ANS AND REC ANS ONLY
or
#
Using the answering machine
.