Record, Play Or Delete Your Own Outgoing Message; Select The Ogm; Ring Delay; Remote Access - Motorola T1 Series Manual

9.6.3

Record, play or delete your own outgoing message

m
1. Press , scroll
d
2. Scroll to OGM SETTING
u d
3. Press or to select either
u d
4. Scroll or to select either PLAY,
If you select PLAY the current OGM will play back.
If you select RECORD
end recording press
If you selected USE DEFAULT
9.6.4

Select the OGM

m
1. Press , scroll
d
2. Scroll to ANSWER MODE
u d
3. Press or to select either
confirm.
NOTE
If the answering machine is turned off and then turned on via the base unit the settings will
be the same as when it was last switched on.
9.7

Ring delay

Select the duration of rings before your answer machine picks up the call. Choose from 3-8
Rings or Toll Saver.
• When set to Toll Saver, if you have new messages your phone answers after 3 Rings.
• If there are no new messages it will answer after 5 Rings. So you have the option to
hang up, saving the time and cost of a call.
• If the memory is full, it will automatically revert to Answer Only mode.
m
1. Press , scroll
d
2. Scroll to RING DELAY
u d
3. Use or to select the number of rings required and press
9.8

Remote access

You can operate your answering machine from any DTMF phone by calling your product
and entering a 4 digit security PIN code.
1. Dial your telephone number. When you hear your outgoing message, press #.
2. Enter your 4-digit PIN (default setting 0000) you will hear a confirmation beep. Use the
keypad to operate the answering machine.
34
d
to ANSW MACHINE
and press
ANSWER ONLY
RECORD
once you hear the beep speak your message into the handset, to
m
. The OGM will play back.
the display shows CONFIRM?, press
d
to ANSW MACHINE
and press
ANSWER ONLY
d
to ANSW MACHINE
m
and press
m
and press .
m
.
or RECORD ALSO
or USE DEFAULT
m
and press .
m
.
or RECORD ALSO
m
and press .
. The handset will display the current setting.
Using the answering machine
m
and press .
m
and press .
m
to confirm.
m
and press to
m
to confirm.