Adjusting The External Input Audio Level; Setting The Usb Adapter To On/Off; Setting The Rear Camera Input; Setting The Picture/Sound Output - Alpine IVA-D105 Owner's Manual

Adjusting the External Input Audio Level

After setting to ON in "Setting the AUX Mode," this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting content: LOW / HIGH
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level

Setting the USB Adapter to ON/OFF

If a USB Adapter is to be used, set to ON.
Setting item: USB ADAPTER
Setting content: OFF / ON
OFF: Does not display the USB source name on the SOURCE
select screen.
ON: Displays the USB source name on the SOURCE select
screen.
• If ON is set even when a CD changer is connected, the source name
on the SOURCE select screen will change from CD CHG to USB.

Setting the Rear Camera Input

With a rear camera connected, rear view video is output to the monitor.
Setting item: CAMERA IN
Setting contents: OFF / ON
OFF: The CAMERA source is not displayed on the VISUAL
selection screen.
ON: Even if the shift lever is not set to reverse (R), the rear
pictures are output by selecting the CAMERA source.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
• To apply the setting, set to VISUAL "Setting the VISUAL Button"
(page 38).

Setting the Picture/Sound Output

Outputs the picture/sound of the source selected on the IVA-D105
connected to the rear monitor.
Setting item: AUX OUT
Setting content: OFF / ON
ON: The "REAR SELECT" item is displayed on the SETUP
select screen.
Touch [ ] of REAR SELECT to change to the REAR
select screen, then touch [
selected source picture/sound is output on the rear
monitor.
OFF: The "REAR SELECT" item is not displayed on the SETUP
select screen.
38
-EN
] of the desired source. The
Setting the Bluetooth Connection
(Bluetooth IN)
Setting item: Bluetooth IN
Setting contents: NAV. / ADAPTER / OFF
NAV.: select when an optional Portable Navigation is
connected.
Change voice line to RCA when TEL rings.
ADAPTER: select when an optional Bluetooth box is
connected.
When external interruption occurs, the display
changes to the TEL screen.
A source name of TEL on the SOURCE selection
screen is displayed.
OFF: Select to ignore any external interrupts.
• For details on Bluetooth operation, refer to the Owner's Manual of
the Bluetooth Box.

Setting the VISUAL Button

Setting item: VISUAL KEY
Setting content: VISUAL / NAV.
NAV.: Switches directly to the navigation screen by pressing
VISUAL. (Only when an Alpine optional RGB
Navigation is connected.)
VISUAL: Recalls the VISUAL Select screen by pressing
VISUAL.

Subwoofer On and Off

Setting item: SUBW. OUT
Setting contents: ON / OFF
ON: Subwoofer output is on.
OFF: Subwoofer output is off.

Setting the Digital Output

To connect an audio processor using the optical digital output, set to
"ON" by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.