Media Warning; Changing Dvd Regional Codes - Alienware Aurora mALX User Manual

Alienware Aurora mALX Technical Reference
System Map: Left View
Figure  - 
Left View
1. S/PDIF-Out Jack
2. Line-In Jack (see page A -3)
3. Microphone-In Jack
4. Headphone-Out Jack
5. Optical Device Drive Bay (for CD/DVD Device)
CD Emergency Eject
If you need to manually eject a CD/DVD (e.g. due to an unexpected power interruption)
you may push the end of a straightened paper clip into the emergency eject hole.
Do not use a sharpened pencil or similar object that may break and become lodged
in the hole.

Media Warning

Don't try to remove a floppy disk/CD/DVD while the system is accessing it. This may
cause the system to "crash."

Changing DVD Regional Codes

Go to the Control Panel and double-click System > Hardware (tab), click Device
Manager, then click the + next to DVD/CD-ROM drives. Double-click on the DVD-ROM
device to bring up the Properties dialogue box, and select the DVD Region (tab) to
bring up the control panel to allow you to adjust the regional code (see "DVD Regional
Codes" on pages 2-5).
DVD region detection is device dependent, not OS-dependent. You can select your
module's region code 5 times. The fifth selection is permanent. This cannot be altered
even if you change your operating system or you use the module in another computer.