Phaser - Akai DPS 24 Reference Manual

140
FX PARAMETERS

PHASER

The common parameters for the Phaser effects are:
• Rate (0.1Hz - 10.0Hz)
• Depth (0% - 100%)
• Fdback (0% - 100%)
User Guide
Adjusts the speed of LFO
Adjusts the depth of LFO
Adjusts the feedback amount
MONO PHASER
This is a typical phaser effect with mono-in and mono-out.
You can adjust the pan setting of the effect sound with the
additional Pan parameter:
• Pan (-60 - +60)
STEREO PHASER
This is a stereo phaser effect (mono in - stereo out).
You can adjust the width and spread of the stereo im-
age with the additional Width parameter:
• Width (0% - 100%)
XOVER PHASER
This is a variation of the STEREO PHASER.
The feedback from the L/R channels is input to the
opposite channels.
The parameters are the same.
PAN PHASER
This effect adds an auto panning effect to the mono
phaser effect sound.