Akai DPS 24 Reference Manual page 148

134
FX PARAMETERS
REVERB>STD PLATE
This stereo reverb effect simulates reverberations of a plate with standard character.
REVERB>STD HALL
This stereo reverb effect simulates reverberations in a hall with standard character.
REVERB>DRUM BOOTH
This stereo reverb effect simulates reverberations in a drum booth.
REVERB>BRIGHT PLATE
This stereo reverb effect simulates reverberations of a plate with expressive character.
REVERB>STRING HALL
This stereo reverb effect simulates reverberations in a hall with expressive character.
REVERB>STD ROOM
This stereo reverb effect simulates reverberations in a room with standard character.
REVERB>VOCAL PLATE
This stereo reverb effect simulates reverberations of a plate suitable for vocal sound.
DELAY
The basic parameters for Delay effects are:
• Delay (1ms - 1500ms)
• Fdback (0% - 100%)
• HFdamp (20Hz - 20kHz)
User Guide
Adjusts the Delay time.
Adjusts the amount of delay Feedback.
Sets the frequency at which the higher range of the feed-
back sound is cut.
MONO DELAY
This is a common delay effect with mono-in and mono-out.
You can adjust the pan setting of the effect sound with the
additional Pan parameter:
• Pan (-60 - +60)
PINGPONG DELAY
This delay effect pans the delay sound left and right.
You can adjust the width and spread of the stereo image
with the additional Width parameter:
• Width (0% - 100%)