Information; Important Safety Information; Wichtige Sicherheitshinweise - 3Com OfficeConnect 3CRWE51196 User Manual

D
Important Safety

Information

Wichtige
Sicherheitshinweise
S I
AFETY NFORMATION
WARNING: Warnings contain directions that you must follow for your personal
safety. Follow all directions carefully.
You must read the following safety information carefully before you install or
remove the unit:
WARNING: The Gateway generates and uses radio frequency (rf) energy. In some
environments, the use of rf energy is not permitted. The user should seek local
advice on whether or not rf energy is permitted within the area of intended use.
WARNING: Exceptional care must be taken during installation and removal of the
unit.
WARNING: Only stack the Gateway with other OfficeConnect units.
WARNING: To ensure compliance with international safety standards, only use the
power adapter that is supplied with the unit.
WARNING: The socket outlet must be near to the unit and easily accessible. You
can only remove power from the unit by disconnecting the power cord from the
outlet.
WARNING: This unit operates under SELV (Safety Extra Low Voltage) conditions
according to IEC 950. The conditions are only maintained if the equipment to
which it is connected also operates under SELV conditions.
WARNING: There are no user-replaceable fuses or user-serviceable parts inside the
Gateway. If you have a physical problem with the unit that cannot be solved with
problem solving actions in this guide, contact your supplier.
WARNING: Disconnect the power adapter before moving the unit.
WARNING: RJ-45 ports. These are shielded RJ-45 data sockets. They cannot be
used as telephone sockets. Only connect RJ-45 data connectors to these sockets.
ACHTUNG: Warnhinweise enthalten Anweisungen, die Sie zu Ihrer eigenen
Sicherheit befolgen müssen. Alle Anweisungen sind sorgfältig zu befolgen.
Sie müssen die folgenden Sicherheitsinformationen sorgfältig durchlesen, bevor Sie
das Geräts installieren oder ausbauen:
ACHTUNG: Der Gateway erzeugt und verwendet Funkfrequenz (RF). In manchen
Umgebungen ist die Verwendung von Funkfrequenz nicht gestattet. Erkundigen
Sie sich bei den zuständigen Stellen, ob die Verwendung von Funkfrequenz in dem
Bereich, in dem der Bluetooth Access Point eingesetzt werden soll, erlaubt ist.
ACHTUNG: Bei der Installation und beim Ausbau des Geräts ist mit höchster
Vorsicht vorzugehen.