B - 6
MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Editing Profiles
Mode Tab
To change the ESSID and operating mode for a profile, select the profile and tap Edit to display the
1.
tab.
Infrastructure Mode
Mode Tab
Figure B-3
Set the operating mode from the
2.
to enable the MK1250 to transmit and receive data with an AP.
Select the country of operation for the MK1250 from the
APs country setting, and be appropriate for the country of operation. Select
MK1250 with a non-Symbol AP or a pre-AP 4131 model.
To save the Mobile Companion settings and retain them across cold boot cycles, tap
3.
Save Configuration
Authentication Tab
Select the Authentication tab to configure server-based authentication. Select one of the following
Authentication options from the
•
None - Default setting when authentication is not required on the network. The client adapter does not
use any authentication scheme when
•
Kerberos
•
LEAP
•
EAP-TLS
•
PEAP.
Operating Mode
.
drop-down list.
Authentication
Open System
drop-down list. Choose
Infrastructure
drop-down list. This should match the
Country:
is selected on the
Encryption
Mode
(the default mode)
if using the
International
Start > Programs >
tab.