L2Tp - D-Link Wireless N Router DIR-615 User Manual

Section  - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
Address Mode: Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases,
select Dynamic.
L2TP IP Address:
Enter the L2TP IP address supplied by your ISP (Static only).
L2TP Subnet Mask:
Enter the Subnet Mask supplied by your ISP (Static only).
L2TP Gateway:
Enter the Gateway IP Address provided by your ISP.
DNS Servers:
Enter the Primary and Secondary DNS Server Addresses (Static
L2TP only).
L2TP Server IP:
Enter the Server IP provided by your ISP (optional).
Account:
Enter your L2TP account (username).
Password:
Enter your L2TP password and then retype the password in the
next box.
Maximum Idle Time:
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is
the default MTU.
Connect Mode:
Select either Always-on, On-Demand, or Manual.
D-Link DIR-615 User Manual
Internet Setup

L2TP

1