Pptp - D-Link Wireless N Router DIR-615 User Manual

Section  - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with
a username and password. This option is typically used for DSL services.
Address Mode:
Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic.
PPTP IP Address:
Enter the IP address (Static PPTP only).
PPTP Subnet
Enter the Primary and Secondary DNS Server Addresses (Static
Mask:
PPTP only).
PPTP Gateway:
Enter the Gateway IP Address provided by your ISP.
DNS Servers:
The DNS server information will be supplied by your ISP (Internet
Service Provider.)
PPTP Server IP:
Enter the Server IP provided by your ISP (optional).
Account:
Enter your PPTP account (username).
Password:
Enter your PPTP password and then retype the password in the
next box.
Maximum Idle
Enter a maximum idle time during which the Internet connection is
Time:
maintained during inactivity. To disable this feature, enable Auto-
reconnect.
MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the
default MTU.
Connect Mode: Select either Always-on, On-Demand, or Manual.
D-Link DIR-615 User Manual
Internet Setup

PPTP

1