Static (Assigned By Isp) - D-Link Wireless N Router DIR-615 User Manual

D-link wireless router user manual
Hide thumbs Also See for Wireless N Router DIR-615:
Table of Contents

Advertisement

Section  - Configuration
Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP address,
subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by a dot (x.x.x.x). The router will not accept the IP address if it is not in this format.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
ISP Gateway:
Enter the Gateway assigned by your ISP.
MAC Address:
The default MAC Address is set to the Internet port's
physical interface MAC address on the Broadband
Router. It is not recommended that you change the
default MAC address unless required by your ISP.
You can use the Clone Your PC's MAC Address
button to replace the Internet port's MAC address
with the MAC address of your Ethernet card.
DNS Servers:
The DNS server information will be supplied by your
ISP (Internet Service Provider.)
MTU:
Maximum Transmission Unit - you may need to
change the MTU for optimal performance with your
specific ISP. 1500 is the default MTU.
D-Link DIR-615 User Manual
Internet Setup

Static (assigned by ISP)

0

Advertisement

Table of Contents
loading

Table of Contents