D-Link EXPRESS ETHERNETWORK VDI-604 User Manual page 44

Assigning a Static IP Address
Note: Residential Gateways/Broadband Routers will automatically assign
IP Addresses to the computers on the network, using DHCP (Dynamic
Host Configuration Protocol) technology. If you are using a DHCP-capable
Gateway/Router you will not need to assign Static IP Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to
assign a Static IP Address, please follow these instructions:
Go to START
Double-click on
Control Panel
Double-click on
Network
Connections
-44-