Getting Started - D-Link EXPRESS ETHERNETWORK VDI-604 User Manual

Getting Started

Installation Location
The VDI-604 can be positioned at any convenient place in your office or
house. No special wiring or cooling requirements are needed. However,
you should comply with the following guidelines:
Place the VDI-604 on a flat horizontal plane.
Keep away from any heating devices.
Do not place in a dusty or wet environment.
The recommended operational specifications of the VDI-604 are:
Temperature
Humidity
In addition, remember to turn off the power, remove the power cord from
the outlet, and keep your hands dry when you install the hardware.
Network Settings
To use the VDI-604 correctly, you have to properly configure the network
settings of your computers. The default IP address of the VDI-604 is
192.168.0.1, and the default subnet mask is 255.255.255.0. These
addresses can be changed as needed, but the default values are used in
this manual. If the TCP/IP environment of your computer has not yet been
configured, you can refer to Configuring Your PCs to Connect to the
VDI-604 to configure it.
For example:
1. Configure your computer IP as 192.168.0.3, subnet mask as
255.255.255.0 and gateway as 192.168.0.1
Or more conveniently
2. Configure your computers to obtain TCP/IP settings automatically
from the DHCP server feature of the VDI-604
Since the IP address of the VDI-604 is 192.168.0.1, the IP address of
your computer must be 192.168.0.X (where "X" is a number between 2
and 254.) Each computer on your network must have a different IP
address within that range. The default gateway must be 192.168.0.1 (the
IP address of the VDI-604).
o
32 F ~ 131
5 % ~ 90 %
-10-
o
F