Restoring To An I/O Card - Yamaha AW4416 Manual Supplement

AW4416 Version 2.0 Manual Supplement

Restoring to an I/O card

When an AW4416 scene is recalled (or when a song
is loaded), the MEM.BANK 1 settings are automati-
cally restored to the I/O card in option slot 1, and the
MEM.BANK 2 settings to the I/O card in option slot 2.
However if necessary, you can also perform the
restore operation manually. This method allows the
MEM.BANK 1 settings to be restored to the I/O card of
option slot 2 (or vice versa). The procedure is as fol-
lows.
1
Press the [AUX7]
key [F5] key to access the Plug-In 1 page
or Plug-In 2 page.
Access the Plug-In 1 page if you want to restore
to the I/O card installed in option slot 1, or
access the Plug-In 2 page if you want to restore
to the I/O card installed in option slot 2.
2
Hold down the [SHIFT] key and press the
[F2] (Restore) key.
A popup window will appear, allowing you to
restore the I/O card settings.
3
Move the cursor to either the MEM.BANK
1 or MEM.BANK 2 button, and press the
[ENTER] key.
Select either MEM.BANK 1 or MEM.BANK 2 to
choose the restore-source memory bank (1 or 2).
If the memory bank already contains data, the
bank name will be displayed. If it does not con-
tain data, the display will indicate "NO DATA!"
22
[F5] key or the [AUX8]
Version 2.0 Manual Supplement
At this time you must select a memory bank that con-
tains data for an I/O card of the same type as the
restore-destination. If the I/O card is of a different
type, the Restore operation cannot be performed.
4
To execute the Restore operation, move
the cursor to the OK button and press the
[ENTER] key.
The saved settings will be loaded into the I/O
card.