Panasonic SCHC37 Owner's Manual page 7

3
Attach the wall mount bracket to the wall with 2
screws (not supplied). (Both sides)
≥ Use a spirit level to ensure both wall mount brackets
are level.
≥ Make sure that the screw used and the wall are
strong enough to support the weight of at least
33 kg (72.8 lbs).
At least 30 mm (1
4 mm
( /
5
32
4
Fix the safety holder onto the unit with the
screw (supplied).
{. Screw tightening torque: 50 N0cm (0.4 lbf0ft) to 70
N0cm (0.5 lbf0ft).
5
Attach the fall prevention cord (not supplied) to
this unit.
≥ Use a cord that is capable of supporting over 33 kg
(72.8 lbs) (with a diameter of about 1.5 mm (
/
3 q)
16
‰7.5 mm ( 19 /
64
‰9.4 mm ( /
3 q)
8
q)
Wall mount bracket
Screw
(supplied)
1
Cord (not supplied)
6
Hook the unit securely onto the wall mount
brackets with both hands.
≥ Connect the FM antenna and the AC power supply
cord to the unit before hanging the unit onto the
wall. (
≥ After hanging the unit, release your hand carefully
to confirm the unit sits securely on the wall.
q) to
7
Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto
the wall.
≥ Make sure that the screw used and the wall are
strong enough to support the weight of at least
33 kg (72.8 lbs).
≥ Refer to step 3 for requirements before screwing.
/ q)).
16
8
Attach the fall prevention cord (not supplied) to
the wall.
≥ Make sure that the screw used and the wall are
strong enough to support the weight of at least
33 kg (72.8 lbs).
≥ Make sure that the slack of the cord is minimal.
Screw eye (not supplied)
Cord (not supplied)
8)
Wall
Safety holder
Fixed to the wall
Safety holder fixing screw
(not supplied)
Wall
7
RQT9633