Enjoying Sound Effects From All Speakers - Panasonic SC-BTT196 Owner's Manual

∫ Delay time
For optimum listening with 5.1-channel sound, all
the speakers, except for the subwoofer, should be
the same distance from the seating position.
If either distance 1 or 2 is less than 3,
measure the distance and adjust the time to make
up for the difference (see the table below).
C
L C
1
2
LS
LS
1 2 3: Primary listening distance
A Actual speaker position
B Ideal speaker position
Press [3, 4, 2, 1] to select the distance
1
ms
box ( ) and press [OK].
0.0
Press [3, 4] to select the setting and
2
press [OK].
Delay time for the Center speaker
Subtract the distance 1 from 3
Distance (Approx.)
34 cm (1 ft. 1 in.)
68 cm (2 ft. 2 in.)
102 cm (3 ft. 4 in.)
136 cm (4 ft. 5 in.)
170 cm (5 ft. 6 in.)
Delay time for the Surround speakers
Subtract the distance 2 from 3
Distance (Approx.)
170 cm (5 ft. 6 in.)
340 cm (11 ft. 1 in.)
510 cm (16 ft. 8 in.)
To finish the speaker setting
Press [3, 4, 2, 1] to select "Complete" and
press [OK].
:
A
R
3
:
B
SW
RS
RS
Setting
1.0 ms
2.0 ms
3.0 ms
4.0 ms
5.0 ms
Setting
5.0 ms
10.0 ms
15.0 ms
Enjoying sound effects
from all speakers
For more details on each setting, refer to "Audio
Settings" on the Option menu(
Surround Effects
1 Press [SURROUND].
2 Press [3, 4] to select "MULTI CH SOURCE"
or "2CH SOURCE", and then press [OK].
e.g.,
3 While the selected mode is displayed
Press [3, 4] to select the desired setting. (
∫ Adjusting speaker level during
play
1 Press [CH SELECT] to activate the speaker
setting mode.
2 Press [CH SELECT] several times to select
the speaker.
≥Press [2, 1] to adjust the balance of
the front speakers.
3 Press [3] (increase) or [4] (decrease) to adjust
the speaker level for each speaker.
s6 dB to r6 dB
Sound Effects
1 Press [SOUND].
2 Press [3, 4] to select "2CH SOURCE" or
" ALL SOURCE", and then press [OK].
e.g.,
3 While the selected mode is displayed
Press [3, 4] to select the desired setting and
press [OK].
Repeat this procedure if necessary. (
≥ The sound effects/modes may not be available or have no
effect with some sources.
≥ You may experience a reduction in sound quality when
these sound effects/modes are used with some sources. If
this occurs, turn the sound effects/modes off.
30)
30)
30)
VQT3X51 37