Enjoying Surround Sound And Various Sound Effects; Enjoying Surround Sound Effects; Changing The Sound Modes - Panasonic SC-BTX75 Operating Instructions Manual

Enjoying surround sound and various sound
effects
≥The following sound effects/modes may not be available or have no effect with some sources.
≥You may experience a reduction in sound quality when these sound effects/modes are used with some sources. If this occurs, turn the
sound effects/modes off.
SURROUND
SURROUND
-CH SELECT
-CH SELECT

Enjoying surround sound effects

∫ When only the supplied speakers are connected.
≥Underlined items are the factory presets.
Available surround sound effects for 2.1 ch settings
Effect
7.1CH VS* : You can enjoy 5.1/7.1-channel surround-like
1, 2, 3
effect using 2.1-channel speakers.
This function is effective only when playing
4.1 ch sources or above.
2CH STEREO: You can play any source in stereo without the
surround sound effect.
Press [SURROUND] several times to select the effect.
≥You can also press [SURROUND] and then [3, 4] to select the
mode.
≥The selected effect will only be displayed on the main unit.
*1 7.1CH VS is not available when the audio source
currently playing is 2.1 ch, 3.1 ch.
*2 The 7.1-channel surround-like effect will only
NOTE
function when playing 6 or more channel sources.
*3 The effects do not work when audio is output from
the HDMI AV OUT terminal.
≥"NOT CONDITIONAL" is displayed on the main unit if
the setting is not active.
SOUND
SOUND
OK
Setting

Changing the sound modes

Available sound modes
Mode
EQ: You can select sound quality settings.
(Equalizer) – FLAT(Flat):
– HEAVY(Heavy):Adds punch to rock.
– CLEAR(Clear): Clarifies higher sounds.
– SOFT(Soft):
SUB W: This unit will change the settings for the
(Subwoofer amount of bass depending on the source.
level) However you can also adjust the amount of
bass for the source being played.
–1 (Weakest effect)
–2
–3
–4 (Strongest effect)
≥The setting you make is retained, and
recalled every time you play the same type of
source.
W.S.: You can enhance the surround effect for low
(Whisper-mode volume sound.
Surround) (Convenient for late night viewing.)
– ON
– OFF
1 Press [SOUND] several times to select the mode.
≥You can also press [SOUND] and then [3, 4] to select the
mode.
≥The selected effect will only be displayed on the main unit.
2 While the selected mode is displayed
Press [2, 1] and select the desired setting.
Setting
Cancel (no effect is added).
For background music.
VQT2Q72
15