Panasonic SC-BTT196 Owner's Manual page 39

[BTT196] [BTT195]
Front speaker assembly option
It is possible to shorten the height of the front
speaker by directly connecting the speaker to the
base without using the stand.
Preparation
Detach the speaker cable from the stand.
1
Thread the detached cable through the
base.
2
Attach the speaker to the base and tighten
the screw (supplied) securely.
3
Connect the speaker cable to the speaker
and to the terminal of the main unit.
( 11, 12)
∫ Reattaching the speaker cable
to the stand
Straighten the
cable and run
through the
stand.
[BTT196] [BTT195] Preventing from falling
Front speaker
Preventing from dropping
Front speaker, Surround speaker, Center speaker
1
A String (not supplied)
B Rear of the speaker
2
C Screw eye (not supplied)
D Wall
E Approx.150 mm (5
F Less than 100 mm (3
Pull out the
cable through
the hole.
Preventing the speakers
from falling or dropping
Thread a string to the speaker.
≥ Use a string of less than ‰ 2.0 mm (
which is capable of supporting over 10 kg
(22 lbs).
e.g., [BTT196] Front speaker

Thread a string from the wall to the
speaker and tie tightly.
When placed on the floor
When mounted on a wall
29
q),
3
/
32







q)
/
32
q)
15
/
16
VQT3X51 39