ENGLISH
Other Operations and Functions
Convenient Functions
HDMI Control Function
When AVR-4308CI / AVR-3808CI is connected to a TV and player compatible with HDMI control function, you can perform the following operations.
Settings other than AVR-4308CI / AVR-3808CI settings must be made on the respective devices. (Check the operating instructions of each device for details.)
AVR-4308CI / AVR-3808CI power off can be linked to the TV power
•
off step.
When you set "Output audio from amp" in the TV audio output
setup operation, you can switch the amp power on.
You can switch audio output devices with a TV operation.
•
(When outputting from the TV speakers, output switches from
speakers connected to AVR-4308CI / AVR-3808CI).
You can adjust AVR-4308CI / AVR-3808CI volume in the TV volume
•
adjustment operation.
You can switch AVR-4308CI / AVR-3808CI functions through linkage
•
to TV input function switching.
When playing the player, the AVR-4308CI / AVR-3808CI input
•
function switches to the function of that player.
• W hen you want to listen to TV audio by AVR-4308CI / AVR-3808CI,
connect optical digital or analog.
I f the TV you are using has both connection jacks, use the optical
digital connection.
• W hen using these functions set as follows: GUI menu "Manual
Setup" – "HDMI Setup" – "HDMI Control" – "Control" set to "ON"
(vpage 4).
NOTE
• When using the HDMI control function, you can not assign HDMI
input to "TV/CBL" by setting "Source Select" – "(input source)"
– "Assign" – "HDMI" in the GUI menu.
• If you set "Control" to "ON", the "HDMI" and "Digital"
assignment in "Source Select" – "Assign" (vpage 6) under
the GUI menu changes.
• When "Control" is set to "ON", the digital input connector
assigned to "TV/CBL" changes to "Optical3".
Connections
Player compatible
with HDMI
control function
Television compatible with
HDMI control function
L
R
L
R
<Illustration : AVR-4308>
NOTE
When "Control" is set to "ON", power is supplied
constantly to the AC outlet (UNSWITCHED).