Level Meter - Yamaha M7CL Owner's Manual

C Channel Select / Sends On Fader
This checkbox enables you to specify whether or not the M7CL console and M7CL Editor are linked to each other
for the following operations:
• Selecting channels
• Switching between normal mode and SENDS ON FADER mode
• Switching between MIX and MATIRX in SENDS ON FADER mode
If you do not check the box, the M7CL console and M7CL Editor will operate independently.
D Fast Sync
This allows synchronization to be speed up, reducing the time required. Check this box to enable the function.
E Window Control From Console
This option determines whether or not using the USER DEFINED KEYS on the console enables you to remotely
open and close the M7CL Editor windows.
F

Level Meter

By disabling the meter function you can reduce the processing load caused by screen drawing and communica-
tion. This option specifies whether the level meter functionality will be enabled.
G
Confirmation
These check boxes specify whether a confirmation dialog box will appear when you store (Store Confirmation),
recall (Recall Confirmation), patch (Patch Confirmation), or make a patch change that would modify an existing
patch (Steal Patch Confirmation).
H Administrator Password
Enter the Administrator password that was specified on the M7CL console. If this password is not entered cor-
rectly, it will not be possible to synchronize from M7CL Editor to the M7CL console.
I Set Default
Press this button to use the settings currently specified in the System Setup dialog box as the default settings. The
next time when you start up M7CL Editor, it will use these settings.
3 M7CL V3 Editor Owner's Manual