Table of Contents
Advertisement
DI-206 ISDN Remote Router
Select the desired entry from the screen above:
The parameters in the above window are described as follows:
Remote Name – Name for the remote network that the DI-206 is being set up to
connect with.
Direction – Dial-[In], dial-[Out], or [Both]. This field defines whether the router
on the other network will dial-[In] to the DI-206 to establish a connection, the DI-
206 will dial-[Out] to the other network, or a connection can be established
[Both] ways.
When this is set to In, the DI-206 will only establish a connection with the other
network by receiving calls on the ISDN port specified in the Interface field below.
Also, the incoming calls will be subject to the Name, Password and Rem CLID
fields in the Incoming section below.
36
Advertisement
Table of Contents
