Display Board - Haier HSU-09H03/R - annexe 2 Operation Manual

Operation

Display board

Remote controller
PURIFY
FRESH
HUMIDITY
POWER/SOFT
TEMP./HUMIDITY DISPLAY
1.Unit start
Press ON/OFF on the remote controller, unit starts.
2.
AIP ionizing purification and negative ion functions
Press Purify button. "
controller and " " is displayed on the display
board . Air conditioner starts air ionization purify and
health anion function operation.
For twice press, " " and "
3.Change-for-fresh-air function(optional)
Press FRESH button. "
controller and " " is displayed on the display board ,
and the change-for-fresh-air function operation begins.
For twice press, " " and "
When indoor fan motor is running, it has
purify and
healthy process function.
BRIEF INTRODUCTION TO AIR IONIZATION PURIFY AND
HEALTH ANION FUCTION
1.The anion generator in the air conditioner can generate
a lot of anion effectively balance the quantity of position
and anion in the air and also to kill bacteria and speed up
the dust sediment in the room and finally clean the air in
the room.
2.The purification function of AIP:
DC high voltage bring high voltage electrostatic field, which
ionize air into positive and negative ion.
positive and negative ion adhere to dust passing by, so the
dust become "particle with electric charge".
passing by adheres to the AIP board under the force from
the electric field, which purifies the unit.
3.When power off, press the purify button, the Remote
controller shows "FAN, low, AIP, and negative ion", and
the TIMER function is available.
About UV light degerming function
UV light emitted by the UV light device of the indoor unit catalytically
activates the nano TiO2 on the multi-lights touching intermediary,
and the degerming effect is highly efficient and lasting.
Note: when the function is running, don't open the inlet grille.
About change-for-fresh-air function(optional)
1.After the change-for-fresh-air function is initiated, the outside air can
enter the indoors through the change-for-fresh-air tube thereby
keeping the indoor air fresh.
2.Setting the change-for-fresh-air function under the shutdown status:
Under shutdown status, press the fresh key and the remote
controller displays the on status of air flow, low wind, and change-
for-fresh-air functions, and now can set the timing open, timing
close and time control switch. Press on/off button to cancel
the change-for-fresh-air function.
HEALTH operation
" is displayed on the remote
"disappear,the operation stops.
" is displayed on the remote
"disappear,the operation stops.
air ionization
a great deal of
so the dust