D-Link DWL_7100 Manual page 18

Using the Configuration Menu (continued)
Advanced > Grouping
Load Balance: Select Enabled or Disabled.
When you Enable
wireless network traffic and wireless clients among the DWL-7100APs in the
network. Assign each access point a different non-overlapping channel (e.g., 1,
6, 11).
User Limit: Set the User Limit in this field (0-64).
Link Integrity: Select Enabled or Disabled.
When Link Integrity is Enabled, whenever the Ethernet connection
between the LAN and the AP is disconnected - then the wireless
segment associated with the AP will also be disconnected from the AP.
Ethernet Link Status:
that there is an Ethernet LAN connection to the AP.
Apply: Click Apply if you have made any changes.
Load Balance you allow several DWL-7100APs to balance
This field displays the Ethernet Link Status. Link Up indicates
18