D-Link DWL_7100 Manual page 13

Using the Configuration Menu (continued)
Home > LAN
LAN is short for Local Area Network. This is considered your internal network. These are
the IP settings of the LAN interface for the DWL-7100AP. These settings may be referred
to as private settings. You may change the LAN IP address if needed. The LAN IP
address is private to your internal network and cannot be seen on the Internet.
Get IP From-
IP Address-
Subnet Mask-
Default Gateway-
Apply-
Select Static (Manual) or Dynamic (DHCP) as the method you
will use to assign an IP address to the DWL-7100AP.
The IP address of the LAN interface. The default IP address is:
192.168.0.50 (Note: You will need to use the AP Manager to
determine the IP address dynamically assigned to the access
point.)
The default subnet mask is 255.255.255.0
This field is optional. Enter in the lP address of the router on your
network.
Click Apply if you have made any changes.
13