Yamaha 01V96i Owner's Manual page 52

52
Error messages
Message
DIO issues
WRONG WORD CLOCK!
Sync Error!(SLOT)
Sync Error!(2TRD)
Sync Error!(ADAT IN)
Memory store/recall issues
Y56K Couldn't Store #xx : SLOT(1).
Y56K Couldn't Recall #xx : SLOT(1).
Channel Library #xx Can't Recall!
Nothing to Undo!
Nothing to Paste.
Can't Paste to a Different Channel Type.
For Effect 1,2 Only.
AUX Pair Status Conflicted!
Surround Mode Conflicted!
Output Has No Gate!
Stereo In Has No Gate!
Stereo In Has No Comp!
#xx of Scene is Read Only!
#xx of Channel Library is Read Only!
#xx of Gate Library is Read Only!
#xx of Comp Library is Read Only!
#xx of EQ Library is Read Only!
#xx of Effects Library is Read Only!
#xx of Input Patch Library is Read Only!
#xx of Output Patch Library is Read Only!
#xx of Scene is Protected!
#xx of Scene is Empty!
#xx of Channel Library is Empty!
#xx of Gate Library is Empty!
#xx of Comp Library is Empty!
#xx of EQ Library is Empty!
#xx of Effects Library is Empty!
#xx of Input Patch Library is Empty!
#xx of Output Patch Library is Empty!
01V96i—Owner's Manual
The wordclock is incorrect.
Cause: The device assigned as the clock source is not running, or a clock source
to which the 01V96i cannot synchronize has been selected.
Synchronization has not been achieved with the input signal from the MY slot.
Check the clock source of the connected device.
Synchronization has not been achieved with the 2TR Digital input signal.
Check the clock source of the connected device.
Synchronization has not been achieved with the ADAT IN input signal.
Check the clock source of the connected device.
The Y56K/Y96K's scene #xx could not be stored.
Cause: You selected scene 97 or later.
The Y56K/Y96K's scene #xx could not be recalled.
Cause: The scene had not been stored in the Y56K/Y96K, or you selected scene
97 or later.
This message appears if you attempt to recall a channel library memory that was
created from a different channel module. For example, this will appear if a library
memory created for an Aux channel is recalled to an Input channel.
Undo is not possible because there is no data in the undo buffer.
This message will appear if you attempt to recall the undo buffer (#U) without
having executed Store or Recall since the console was powered-on.
The copy buffer is empty. This message will appear if you attempt to execute
Channel Paste before executing Channel Copy.
You cannot Paste because the channel module is different. For example, this mes-
sage will appear if you copy INPUT Channel 1 and attempt to paste it to AUX1.
This effect type can be used only with EFFECT 1 and 2. This message will appear
if you attempt to recall HQ.PITCH or FREEZE to EFFECT 3 or 4.
This message will appear if the saved CH Library memory and AUX have different
Pair settings. The library memory has been recalled, but the Pair settings for AUX
have not been reproduced.
This message will appear if the channel library memory and the Surround Mode
settings are different. The library memory has been recalled, but the AUX pair
settings have not been reproduced.
This message will appear if you attempt to recall a Gate library memory to an
Output.
This message will appear if you attempt to recall a Gate library memory to a Ste-
reo In.
This message will appear if you attempt to recall a Comp library memory to a
Stereo In.
This message will appear if you attempt to execute an operation such as Store or
Title Edit on a read-only memory.
This message will appear if you attempt to execute an operation such as Store or
Title Edit on a protected scene.
This message will appear if you attempt to recall a scene or library memory in
which no data has been saved
Summary