Front Panel - Pioneer DJM-707 Operating Instructions Manual

PART NAMES AND FUNCTIONS

Front Panel

38 FADER REVERSE switches
CH-1 ON/OFF
When set to [ON], the top panel's CH-1 REVERSE indicator
lights, and the CH-1 fader lever operates in the reverse
direction (scale mark "0" becomes 0 dB attenuation, and
"10" becomes minus infinity). The fader start function also
operates in reverse.
CH-2 ON/OFF
When set to [ON], the top panel's CH-2 REVERSE indicator
lights, and the CH-2 fader lever operates in the reverse
direction (scale mark "0" becomes 0 dB attenuation, and
"10" becomes minus infinity). The fader start function also
operates in reverse.
C.F. ON/OFF
When set to [ON], the top panel's cross fader REVERSE
indicator lights, and the cross fader lever operates in the
reverse direction (left side becomes CH-2, and right side
becomes CH-1). The fader start function also operates in
reverse.
39 FADER START selector switches
C.F.1 / CH-1
This switch determines whether the fader start operation for
the CD player connected to CH-1 is activated by the cross
fader lever, or by the CH-1 fader lever.
When the top panel's CH-1 FADER START button is set to
On, selecting [C.F.1] causes the top panel's C.F.1 FADER
START indicator to light, and selecting [CH-1] causes the top
panel's CH-1 FADER START indicator to light.
C.F.2 / CH-2
This switch determines whether the fader start operation for
the CD player connected to CH-2 is activated by the cross
fader lever, or by the CH-2 fader lever.
When the top panel's CH-2 FADER START button is set to
On, selecting [C.F.2] causes the top panel's C.F.2 FADER
START indicator to light, and selecting [CH-2] causes the top
panel's CH-2 FADER START indicator to light.
10
<DRB1353>
38
FADER REVERSE
CH-1 C.F. CH-2
ON ON ON
OFF OFF OFF
CH-1 CROSS FADER 1
C.F. 1 CH-1
PROFESSIONAL 2CHANNEL MIXER
DJM-707
FADER CURVE
CROSS FADER 2 CH-2
FADER CUT LAG
MIN MAX
42
40 Headphone output jack (PHONES)
Accepts a 6.3 mm stereo headphones plug.
41 POWER switch
42 Fader attenuation dials (FADER CURVE)
CH-1
Use to adjust CH-1's fader attenuation curve.
CH-2
Use to adjust CH-2's fader attenuation curve.
CROSS FADER 1
Use to adjust cross fader's CH-1 attenuation curve.
CROSS FADER 2
Use to adjust cross fader's CH-2 attenuation curve.
FADER CUT LAG
Use to adjust mechanical play at both extremes of the cross
fader movement (the range in which lever movement
produces no effect).
(See page 12, "Fader attenuation curve adjustment".)
39
FADER START
PHONES
C.F. 2 CH-2
POWER
40
41